‘s work [30], which would be discussed later. There were several influencing factors in the biosynthesis process. It was noted that alkaline addition (sodium hydroxide in our work) was necessary for the formation of gold nanoparticles. As shown in CH5183284 molecular weight Figure 3 (curve a), AuNPs were obtained in alkaline solution. If no NaOH or insufficient NaOH was added to the reaction system, KGM failed to reduce gold precursor salts as a result of its weak reduction ability under acidic, neutral, or weakly basic conditions. A control experiment without adding sodium hydroxide was performed in the same reaction conditions as in the
synthesis of AuNPs (Figure 3, curve b). The reaction temperature was also another important factor. It was found that the reaction was extremely slow at 25°C, at which no nanoparticles were detected after 12 h of reduction (Figure 3, curve c). When conducted at a temperature higher than 80°C, the reaction was completed within less than 30 min. However, some visible aggregates were observed due to the gelation of KGM in alkaline solution when temperatures were higher than
55°C [31]. Therefore, we conducted the reactions at 50°C at which it showed a reasonable reaction rate. In addition, the concentrations of KGM and gold precursor were also critical. At a fixed gold LY2835219 solubility dmso precursor concentration (0.89 mM), a high KGM concentration (0.2 to 0.5 wt%) was required for the effective formation
of AuNPs. Decreasing the KGM concentration to 0.1 wt%, while keeping the gold precursor concentration constant (0.89 mM), would produce very little nanoparticles with a weak SPR peak (Figure 3, curve d). The solution of dispersed gold nanoparticles in KGM was highly stable and showed no signs of aggregation after 3 months Nintedanib (BIBF 1120) of storage. Besides, we also examined the stability of the as-synthesized gold nanoparticles under different pH values. No obvious change in UV-vis spectra was observed for AuNPs in solutions of a broad pH range (3 to 13), adjusted by adding hydrochloric acid or sodium hydroxide. The high stability of the prepared nanoparticles would greatly facilitate their use in some biological applications. Figure 3 UV-vis absorption spectra for AuNPs. (a) Under optimized conditions: 0.89 mM HAuCl4 and 0.22 wt% KGM in NaOH solution at 50°C for 3 h. (b) In the absence of NaOH, with other conditions the same as in (a). (c) With 0.89 mM HAuCl4 and 0.22 wt% KGM in NaOH solution at 25°C for 12 h. (d) AuNPs synthesized with 0.89 mM HAuCl4 and 0.1 wt% KGM in NaOH solution at 50°C for 3 h. Analysis of morphologies and crystalline structure of AuNPs The size and shape of the synthesized AuNPs were confirmed by TEM analysis. Ruxolitinib order Typical TEM images of the nanoparticles formed were presented in Figure 4a,b, which show that the gold nanoparticles exhibit uniform spherical shape.
Related posts:
- Only significantly larger concentrations of gold nanoparticles re
- N-[(3-trimethoxysilyl) propyl] EDTA trisodium salt (50% in water)
- Of this suspension, 25 μl was used to assay for total glutathione
- 9 meV/K obtained in the current work Furthermore, this deviation
- J Appl Toxicol 2010,30(3):212–217 62 Karthikeyan B, Kalishwaral