The fragility of the MIFs allowed cleaning the glass surface from the nanoislands using just cotton with acetone. The topography of the MIFs was characterized with a Veeco Dimension 3100 atomic force microscope (AFM; Veeco Instruments Inc., Plainview, NY, USA), which allowed studying both the shape of separate silver islands and their size and distribution corresponding to different SOD regimes. Atomic layer deposition and characterization ALD was used to coat the MIF samples with thin layers of titanium dioxide. TiO2 was chosen for its high refractive index (n = 2.27) strongly influencing the SPR wavelength and because of its applicability for photocatalysis. Films were click here deposited at 120°C with
Beneq TFS-200 reactor (Beneq, Espoo, Finland) using titanium tetrachloride (TiCl4) and water (H2O) as precursors, and between each deposition cycle, a nitrogen purge was used to remove extra precursor materials from the reactor chamber. The samples NU7441 purchase covered with TiO2 film of different thicknesses were also characterized with a Specord 50 spectrophotometer and a Veeco Dimension 3100 atomic force microscope. Surface-enhanced Raman scattering
measurements Signal enhancement properties of the MIF samples were examined using rhodamine 6G as a target molecule. Five-microliter droplets of 1 μM rhodamine (diluted in water) were deposited on all samples and allowed to dry forming an analyte-covered circular area of 4 to 5 mm in diameter. Raman scattering was measured using an inVia Raman microscope system (Renishaw,
Gloucestershire, UK) with a 514-nm excitation laser. The beam was focused into an approximately 5-μm spot, and for each sample, nine measurements were performed from an area of 50 × 50 μm2 and the spectra were collected using an optical power of 50 μW and exposure times of 10 and 20 s for the uncoated and coated samples, respectively. The collected spectra were averaged and the background fluorescence was subtracted using an asymmetric least squares smoothing. Results and discussion Structure and optical absorption of initial MIF AFM studies of SOD MIF samples allowed concluding that depending on the mode of SOD we can fabricate MIFs consisting of tiny (approximately 10 nm), nearly isolated silver nanoislands (Figure 1a), bigger islands Etoposide which can be placed very closely (Figure 1b), and partly coagulated nanoislands (Figure 1c). Figure 1 AFM images of MIFs prepared using annealing in hydrogen at 150°C (a), 250°C (b), and 300°C (c). The optical absorption spectra of the prepared samples and the spectra of MIFs obtained using subtraction of spectra measured with and without the MIF are presented in Figure 2. One can see that the shape and position of the SPR peak in the absorption spectra are strongly influenced by the processing mode, but generally higher temperature of SOD results in higher SPR absorption.
Related posts:
- 30) to form a single-beam optical trap A R glutinis cell in the
- The adhesive was spread out in a very thin layer and allowed to
- Particulate absorption spectra, ap(λ) [m−1], were measured in the
- Imiquimod in the centre of the board facing away from the observer and was allowed to explore the apparatus freely
- e , the rate of evidence accumulation) is allowed to vary across